Low Price Drill Bits Comparison Table

 

Product Our Review Our Rating
Makita T-01725 Impact Drill-Driver Bit Set, Black Oxide, 70-Piece
Makita T-01725 Impact Drill-Driver Bit Set, Black Oxide, 70-Piece

Check Price and Availability

OUR CHOICE

70-Piece Impact Drill-Driver Bit Set
7 Drill Bits, 3 Long Insert Bits, 4 Hex Shank Spade Bits, 9 2 Inch Power Insert Bits, 32 Insert Bits, 2 Hex To Square.
Oxide coating

Makita drills and drivers are good, but their low price drill bits break easy and don’t last. But kit looks very nice, well packed each bit had an individual pocket.

We recommend to buy the kit to have a cheap set of bunnings bits to make up all the random sizes that you rarely use.

Later (or at last) you can buy a bunch of individually purchased decent ones in common sizes and replace often used bits with more expensive.

13-Piece Titanium Drill Bit Set

1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 11/64, 3/16, 13/64, 7/32, 15/64, and 1/4 in.

Titanium coating low-price drilling bit set

Classic high-speed steel construction with titanium coating.

135° split point tip and twist design: increases cutting speed with self-centering and prevents walking, clears chips and particles faster

Drill tips are non-cutting: don’t contribute to the; cutting process; they consume power and torque to move through the wworkpiece must reduce the chisel edge length to be as short as possible in length!

Bastex, 13pc 1/4" Hex Shank Titanium Coated Pilot Drill Bit Set
13pc 1/4″ Hex Shank Titanium Coated Pilot Drill Bit Set, Quick Change. Twist Bit size range 1/16″ to 1/4″ for home,office, small project standard use. with hard plastic holder.

 

Check Price and Availability

13pcs 3/4/5mm HSS 1/4 Inch Hex Shank Drill Bit for wood/plastic metal, titanium

Bit Sizes Include: 1/16; 5/64″; 3/32″; 7/64″; 1/8″; 9/64″; 5/32″; 11/64″; 3/16″; 13/64″; 7/32″; 15/64″; 1/4

QUICK CHANGE: 1/4 inch hex shank fits into all power tools more easily and securely, especially for locking into quick-change chuck

ORGANIZED HOLDER: set includes a drill bit holder with size

Shanks are hexagonal, a drill can not only hold them easier, also can be used in` a quick change adapter, so one can change from drill bit to screwdriver in a jiffy.
Quality is not so good, the bits often begin spin inside the shank, you can I can still use it in a standard chuck.

Craftsman 100 Piece drilling and driving kit
Craftsman 100 Piece drilling and driving kit

Check Price and Availability

22 drill bits, 3 drill stops, 1 Allen key, 3 spade bits, 9 nut drivers, 61 driver bits, 1 stubby screw drive masonry.

drill bits – 1/8″, 5/32″, 11/64″, 3/16″, 7/32″, 1/4″

wood brad drill bits – 1/8″, 3/16″, 1/4″, 5/16″, 3/8″

black oxide bits – 1/16″, 5/64″, 3/32″, 7/64″, 1/8″, 9/64″, 5/32″, 3/16″, 1/4″

spade bits – 1/2″, 5/8″, 3/4″

It is good enough for most work at a light or medium duty level. It’s fair for low price drill bits. They’re cheap, so we expect cheap materials.

The case is probably the best part, but there is no labeling system, so quite tedious to put everything back in with some sense of order.

The kit is very well organized and has everything you need for any job around the house, good for around the house errands.

This is a very economical choice to ensure that you have something for anything you might possibly need.

Drill Bit Set, 50-Piece.

1.0mm : 10pcs
1.5mm : 10pcs
2.0mm : 10pcs
2.5mm : 10pcs
3.0mm : 10pcs

50 drill bits, duplicates of each bit. For home use with a hand drill.

The quality is not the best, but there are many extra ones, it doesn’t matter when you break or lose one.

In a common hand drill you cannot regulate the correct feed and speeds so accept you’re going to chew through bits. These low cost drill bits are cheap enough to replace them often.