Best Miter Saw Stand Reviews: Portable, With Wheels, Rolling

For small projects you can just clamp miter saw to a workstation, but cutting miters into lengthy trim pieces needs a real stand. Most of woodworkers don’t really want a bunch of bell and whistles, best miter saw stand should be as light as possible an at the same time sturdy and reliable. The unit will definitely be transported back and forth, so it should not be weak and fragile. However, the stand is not a tool that you will use 24/7, so it shouldn’t cost you an arm and a leg either. Read our article to make an informed decision and purchase the best tool. Any and all suggestions and comments are welcome and appreciated.

Miter saws are a good tool for accurate cuts, but a proper stand adds a lot of  simplicity and accuracy. Good unit can be set to needed height so you don’t hunch over uncomfortably while you work. Best miter stand saw can be adjusted for different lengths with featuring pull-out rests to hold the wood.

When buying a stand, stability is a top-priority consideration. It shouldn’t be wobble, regardless of the material being cut. Shifting stand and sudden jumps can cause injury! So rubberized grips on the feets or locking wheels add stability to the the stand.  The weight capacity of the most stands is between 300 to 700 pounds.  A miter saw produces a lot of force, so the stand should be durable.

Best Portable Miter Saw Stand

Saw stands can range from lightweight full-portable foldable units to large stationary stands. Big units have the highest load capacity and the ability to cut long boards. A medium-sized miter saw stand may also include wheels. Smaller miter saw stands are easy to move from one place to another, but they usually have a lower weight capacity. Average-sized portable units have weight capacity around 500 pounds.

My opinion is that a question about best portable miter saw stand doesn’t has much sence, they are mostly the same. Any middle-priced unit made by known brand  will work. The one thing to consider is that you you most likely will need more clamps for different saws in the future. Therefore, I recommend to choose a brand that will produce and sell clamps for next 20 years.

If your shop is limited in space, look for the stand that folds up smaller. Some units are more than 7′ long, even folded. You may also like having supports close to the miter saw too, not just way on the outside.

Best Miter Saw Stand With Wheels

For me, the best rolling miter saw stand is the Ridgid rolling/folding stand.  Yes, it weighs a bit, I always can fold up and roll away at the end of the day with ease. And this is what I looked for. I can also leave the saw attached and place it vertically in a corner, and this fact is a win for me. Take in mind, every time you have to remove the saw, you spend time and wear mounting components which will inevitably get broken via handling and transport. Ridgid miter saw utility vehicle is a good stand if you want to leave your saw attached.

My previous unit was a cheap foldable Ryobi stand, just 4 legs and quick release brackets. It was a lot lighter, but in my case the rolling stand is much more convenient.

Another example of great miter saw stand with wheels is Makita WST05. It comes with material support extensions and adjustable leg supports. The aluminum feed roller and adjustable material stop help a lot in making repetitive cuts. The design is sturdy, robust stand for the money.

The only way you can make it better is to purchase a 10″ pneumatic wheels from HF and upgrade to a wider wheel base. The stand will become super sturdy and absorb any bumps when wheeling.

Best DeWalt Miter Saw Stand

DeWalt Miter Saw Stand With Wheels

In my opinion, absolutely best values here are the Dewalt heavy duty and Bosch gravity-rise miter saw stands. I have the rolling Dewalt but if it wasn’t tossed in with my saw I could have taken Bosch with equal probability.

DeWalt Miter Saw Stand DWX723

DeWalt miter saw stand dwx723 (Heavy Duty) is very nice and sturdy unit. This stand is a good choice for those who prefer not having wheels because the saw has to be removed to carry the stand. Yes it’s little more efforts but there is less risk to tip over the saw and damage it during transporting.

The stand is easy to move around with the legs folded down lifting the stand by the handle. You can hand carry the saw separately, then set up the stand and snap the saw on top.

DWX723 comes with brackets, there is no need to buy them. This table is great! The stand is extremely stable and pretty simple to set up. It folds easily and is conveniently to transport. The ends extend to support up to a 16 foot piece and come with two supports (you can purchase more or wider ones additionally).

Dewalt Miter Saw Stand DWX724

DWX724 is the most lightweight and compact miter saw stand with weight capacity up to 500 lbs. Its weight is 29.8 Pounds (the 723 is 35 Pounds). DWX724 is slightly higher in folded state (8″ vs. 7″ of DWX723) and is much narrower – 44″ (the width of the DWX723 is about 77″).

The beam of the DWX724 is 3.4 feet long, so you can work with a 10 feet  maximum length of material (much shorter than 16 feet length capacity of a 723 model). The maximum weight capacity is 500 pounds for both models.

Once the brackets are attached, one person can easily attach or remove the saw from the stand. A metal locking bracket on the unit keeps the saw from moving from side to side and adds a bit of extra stability. The stand feels very sturdy, the rubber feet prevent damage to the finished floor surface. The bottom handle is convenient for carrying the stand separately from the saw, all you need is to lock the material support struts. Great choice for those who don’t work with long pieces of material.

DeWalt DWX726 Stand

The miter saw weighs a lot, and because it’s also a bit bulky, you have to carry it out far from my body and it really wrenches the back hauling it around. So the DWX726 rolling stand is a great alternative to the units on legs.

You can leave the saw attached, collapse it, and instead of lugging, roll the  whole setup around. The DeWalt DWX726 is a beast and weighs in at over 60 lbs on its own (twice the weight of the DWX723). The saw bolts solid to the stand and the set up is going to be about 110 lb.

You can load the DWX726 in the truck by putting the handle end on the tailgate, lifting the wheel side and sliding it in. With this approach you never lift more than about 50 lbs, including the weight of the saw.

DWX726 is everything-in-one package and is good for both a permanent setup and a portable one. With the extendable arms, you can make cuts of long trim. It very easy to lower and raise the stand, the wheels make it easy to move the set even up and down stairs by one person. The wheels are large enough for almost any terrain.

In general it is solid and heavy duty stand, mostly for workshop use and large field projects.

Bosch Units

It’s hard to beat the quality of the Bosch miter saw stand and nothing makes your life easier than having the right tool for the job.

Bosch Gravity Rise Miter Saw Stand T4B

Bosch gravity rise miter saw stand T4B Bosch Gravity Rise is a device that can be recommended with confidence. It is easy to lower and raise and the built in outfeeds are very handy. It’s very easy to load into the back of the truck if you need.

The quality is very good, the only two drawbacks are that the supports are more narrow then I would like, so the trim can slip off the side. The second is a size: it really takes up a lot of space.

This stand is pretty heavy, as it’s frame is steel. But you can roll it and the saw never has to come off to transport unless you want to. You can roll it on a cargo trailer effortlessly with a connected saw. The folding mechanism is very nice, in that you don’t have to bend way over or use a lot of leverage.

The knob tightening saw rails is very nice, in other stands I’ve used the saw with the quick release clamps. And they almost never fit tight when installed. With Bosch you just tighten the knobs down and it’s very secure.

The weight of the stand adds stability, but if you really need to load this into the back of a pickup, purchase of the lighter stands like a Bosch leg miter saw. But if you had a ramp, the rolling Bosch stand is the way to go.

Bosch Folding Leg Miter Saw

Bosch leg miter saw is a lightweight aluminum stand which adapts to most miter saws. Its quick-release lock allows to attach the saw to the stand with ease. Carry handle is equipped with a wrench storage and is convenient for transporting folded saw. Sliding rails expand up to 12′ 9″ to support up to 16′ material.

The Bosch folding leg miter saw uses the same saw mounts and main beam extrusion as the T4B. You can dismount the 4310 from the T4B and just clamp in on the GTA 3800. Material supports are interchangeable too.

The GTA3800 is clearly superior choice for shop use. For site work, the T4B is the best unit, if you have a ramp to get it into your trailert/ruck/van.

Conclusions

A miter saw without stand is like a knife without a sheath: more hassle to carry and use than it needs to be. The same is true for any cheap unstable unit or even a homemade stand. But if you need the best stand for your saw I recommend a Bosch or a DeWalt stand.