The question about best screwdriver bit set comes to most of masters after killing a few screws due to the use of too-soft and low-quality bits. Of course, everyone likes to avoid that. It’s not a lot of fun to rectify. Screwdriver bits are an essential part of your toolkit and we’ll help you to find best screwdriver drill bit set for your projects.
Table of Contents
With the screwdriver bits set you are covered for a lot of projects. And although modern tools are designed to ensure durability, you can’t expect any tool to last forever. Of course, you want to find best drill screwdriver bits capable of work with high torque and resist wear as long as possible, and we’ll help.
Before choosing the best drill screwdriver bit set, it’s a good idea to decide which type you need.
All the bits have 1/4″ hex shank, and fit into a drill with any chuck, including hex drive.
Insert bits have the shortest shank, they are the cheapest and are designed to easily clip into a magnetic bit holder.
DeWalt is moderately priced company that makes relatively inexpensive bits that are good for most applications. I remember watching my friend go through like 8 different Philips bits while we built a porch together. And I started the word with a deWalt bit and at the end of the day the same bit still were in acceptable condition. So my choice is obvious.
Power bits are convenient to use with a power drill, they are of longer length and cost are a little higher.
Black & Decker bits are another great example of ideal starter bit set. Pretty good quality and more than enough sizes for home use. Highly recommended, especially for the price!
Double ended bits have a screwdriver tip on each end and potentially give the bit a second life at less than double the cost. But they won’t fit into a 1/4″ hex drive chuck.
You can also find the bits with the hardened tip which is pressed into the hex shaft. The others have the hex bit that “curves” down to the needed square tip. Personally I’ve found the bits with the hardened tip lasting much longer than the others.
Phillips bits are the most common type and for the most popular type of a screw. The bits look like a cross, and come in a range of sizes – #000, #00, #0, #1, #2, #3 and #4. The most common is #2.
My choice here is Bosch power bits. They are hard, seem very well tempered, fit the slots very well and don’t slip at all. They even grip on the cheap screws. With this bits I’ve made with hundreds of screws on one bit! Bosch screwdriver bits are adequately priced and good enough for a home run.
Pozidrive Bits are an improved Phillips bits with an additional contact points. They decrease the possibility the bit will cam-out and allow to apply greater torque and decreases wear. Main sizes are #1 – #3 and #2 the most common too.
You certainly use them when working Ikea furniture and with Wera bits you’ll avoid the using the wrong type of bit to assemble products. This particular set comes with a magnetic bit holder, the plastic case is handy and reliable.
Slotted head screws now are less common, but screwdriver tips are still available. They are not convenient for a power tool as the bit tends to slip out of the head.
Irwin slotted head bits are a little overpriced but I have used them and have been very pleased. They are hollow ground and thin enough to fit into slot head screws nicely. The bits are tough and hard and with occasional use will last almost forever.
Torx Bits have a form of a 6-sided star and resist cam-out much better than previously described bits, and were designed mainly for automatic screw driving machines. Sizes vary from T1 through to T20.
DeWalt are great, they’re under $10.00 priced and just get the job done. Both a bit driver cordless drill with adapter – no issues with quality like others. There are not breakage of the bits, and stripping of drive head. Performs well and fit good. The only drawback is the difficulty in removing the tool from the bit holder.
You can also meet other types such as square recess bits, nutsetters, drywall bits, torq bits, tri-Wing Bits, etc, but they are less common
Honestly I don’t see what the problem is. I have about 20 sets of screwdriver bits and it is the tool that I almost can not pass up when it goes on sale. Over the years I’ve combined the best and most useful screwdriver bits in my own best in the world screwdrivers bit set. I should admit, about 75% of them are deWalts. In my practice the deWalts usually fit like a glove and almost never strip.
Even with the best screwdriver bits in the world you have to match right bit to the screw and that means to use a pozidrive bit for a pozidrive head screw and of course a tapered square bit for a Robertson. Nothing will save the bit and screw from premature failure if the head does not match the bit.
If you have a lot of custom bends and cuts, rebar bender is a GREAT…
Drilling hard and tough materials such as porcelain, ceramic, stone, glass, and marble needs some…
I know guys who used pole sanders for the first ten years and power sanders…
When your deck, siding or floor are exposed to wind, water and especially salty air,…
Chain mortiser is a unique tool helping you to do framing quick and effective. It…
Mortise chisel should have enough thickness to withstand malleting into the wood and levering out…