Drill bits can be made in any size, but standards define sets of sizes that are widely produced and stocked. In the U.S., fractional inch and gauge drill bit sizes are in common use.
(high quality drill bits review, low price drill bits review)
In nearly all other countries, metric drill bit sizes are most common (like Bovidix 1902103423). A comprehensive table for metric sizes can be found at the drill size chart.
Drill Bit Sizes Inch and Decimal
Drill Size | Decimal Equiv | Drill Size | Decimal Equiv | Drill Size | Decimal Equiv. | Drill Size | Decimal Equiv | |||||||
80 | = | 0.0135 | 43 | = | 0.089 | 8 | = | 0.199 | 25/64 | = | 0.3906 | |||
79 | = | 0.0145 | 42 | = | 0.0935 | 7 | = | 0.201 | X | = | 0.397 | |||
1/64 | = | 0.0156 | 3/32 | = | 0.0938 | 13/64 | = | 0.2031 | Y | = | 0.404 | |||
78 | = | 0.016 | 41 | = | 0.096 | 6 | = | 0.204 | 13/32 | = | 0.4063 | |||
77 | = | 0.018 | 40 | = | 0.098 | 5 | = | 0.2055 | Z | = | 0.413 | |||
76 | = | 0.020 | 39 | = | 0.0995 | 4 | = | 0.209 | 27/64 | = | 0.4219 | |||
75 | = | 0.021 | 38 | = | 0.1015 | 3 | = | 0.213 | 7/16 | = | 0.4375 | |||
74 | = | 0.0225 | 37 | = | 0.104 | 7/32 | = | 0.2188 | 29/64 | = | 0.4531 | |||
73 | = | 0.024 | 36 | = | 0.1065 | 2 | = | 0.221 | 15/32 | = | 0.4688 | |||
72 | = | 0.025 | 7/64 | = | 0.1094 | 1 | = | 0.228 | 31/64 | = | 0.4844 | |||
71 | = | 0.026 | 35 | = | 0.110 | A | = | 0.234 | 1/2 | = | 0.500 | |||
70 | = | 0.028 | 34 | = | 0.111 | 15/64 | = | 0.2344 | 33/64 | = | 0.5156 | |||
69 | = | 0.0292 | 33 | = | 0.113 | B | = | 0.238 | 17/32 | = | 0.5313 | |||
68 | = | 0.031 | 32 | = | 0.116 | C | = | 0.242 | 35/64 | = | 0.5469 | |||
1/32 | = | 0.0313 | 31 | = | 0.120 | D | = | 0.246 | 9/16 | = | 0.5625 | |||
67 | = | 0.032 | 1/8 | = | 0.1250 | 1/4 (E) | = | 0.250 | 37/64 | = | 0.5781 | |||
66 | = | 0.033 | 30 | = | 0.1285 | F | = | 0.257 | 19/32 | = | 0.5938 | |||
65 | = | 0.035 | 29 | = | 0.136 | G | = | 0.261 | 39/64 | = | 0.6094 | |||
64 | = | 0.036 | 28 | = | 0.1405 | 17/64 | = | 0.2656 | 5/8 | = | 0.625 | |||
63 | = | 0.037 | 9/64 | = | 0.1406 | H | = | 0.266 | 41/64 | = | 0.6406 | |||
62 | = | 0.038 | 27 | = | 0.144 | I | = | 0.272 | 21/32 | = | 0.6563 | |||
61 | = | 0.039 | 26 | = | 0.147 | J | = | 0.277 | 43/64 | = | 0.6719 | |||
60 | = | 0.040 | 25 | = | 0.1495 | K | = | 0.281 | 11/16 | = | 0.6875 | |||
59 | = | 0.041 | 24 | = | 0.152 | 9/32 | = | 0.2813 | 45/64 | = | 0.7031 | |||
58 | = | 0.042 | 23 | = | 0.154 | L | = | 0.290 | 23/32 | = | 0.7188 | |||
57 | = | 0.043 | 5/32 | = | 0.1563 | M | = | 0.295 | 47/64 | = | 0.7344 | |||
56 | = | 0.0465 | 22 | = | 0.157 | 19/64 | = | 0.2969 | 3/4 | = | 0.750 | |||
3/64 | = | 0.0469 | 21 | = | 0.159 | N | = | 0.302 | 49/64 | = | 0.7656 | |||
55 | = | 0.052 | 20 | = | 0.161 | 5/16 | = | 0.3125 | 25/32 | = | 0.7813 | |||
54 | = | 0.055 | 19 | = | 0.166 | O | = | 0.316 | 51/64 | = | 0.7969 | |||
53 | = | 0.0595 | 18 | = | 0.1695 | P | = | 0.323 | 13/16 | = | 0.8125 | |||
1/16 | = | 0.0625 | 11/64 | = | 0.1719 | 21/64 | = | 0.3281 | 53/64 | = | 0.8281 | |||
52 | = | 0.0635 | 17 | = | 0.173 | Q | = | 0.332 | 27/32 | = | 0.8438 | |||
51 | = | 0.067 | 16 | = | 0.177 | R | = | 0.339 | 55/64 | = | 0.8594 | |||
50 | = | 0.070 | 15 | = | 0.180 | 11/32 | = | 0.3438 | 7/8 | = | 0.875 | |||
49 | = | 0.073 | 14 | = | 0.182 | S | = | 0.348 | 57/64 | = | 0.8906 | |||
48 | = | 0.076 | 13 | = | 0.185 | T | = | 0.358 | 29/32 | = | 0.9063 | |||
5/64 | = | 0.0781 | 3/16 | = | 0.1875 | 23/64 | = | 0.3594 | 59/64 | = | 0.9219 | |||
47 | = | 0.0785 | 12 | = | 0.189 | U | = | 0.368 | 15/16 | = | 0.9375 | |||
46 | = | 0.081 | 11 | = | 0.191 | 3/8 | = | 0.375 | 61/64 | = | 0.9531 | |||
45 | = | 0.082 | 10 | = | 0.1935 | V | = | 0.377 | 31/32 | = | 0.9688 | |||
44 | = | 0.086 | 9 | = | 0.196 | W | = | 0.386 | 63/64 | = | 0.9844 |
Summary
Article Name
Inch and Decimal Drill Bit Sizes, Table of Correspondence
Description
Standards define sets of sizes that are widely produced and stocked. In the US, fractional inch and gauge drill bit sizes are in common use.
Author
Filipp Sernoser
Publisher Name
BestDrillBit.com
Publisher Logo
Thank you.
Bookmarked the page.
I am tired to google the table every time.
The great gauge at the beginning of the article – Irwin.
It is indispensable and comes at a great price on Amazzon.
The gauge made of steel and is almost indestructible.
I’ve found many uses for it like determining bit size, finding screw sizes, etc.
I could not live without it!
Great articles here
Thanks, it’s pain to look for the tables every time I need
Great tables, bookmarked.
Great content!
Nice content!
You should be a part of a contest for one of the finest sites on the internet.
I will recommend this site!
Nice tables, all you need is on the page
Thanks for the post.
I visited multiple blogs but this one is genuinely excellent.
Hi there, colleagues, its enormous piece of writing and it’s completely explained,
keep it up all the time.